IDEA初始化配置

IDEA初始化配置

目录

1.文件编码配置

文件 编码

2. 修改快捷键

在这里插入图片描述

3.智能提示

在这里插入图片描述

4.优化导包

在这里插入图片描述

5.代码不折叠

在这里插入图片描述

6.不打开上一次关闭的工程,新窗口打开新工程

在这里插入图片描述

7.Ctrl + 滚轮改变字体大小

在这里插入图片描述

8.不提示更新软件

在这里插入图片描述

9.注释智能缩进

在这里插入图片描述

10.同一包下的类不以*代替

在这里插入图片描述

11.设置字体

设置编辑器字体

在这里插入图片描述

设置控制台字体

在这里插入图片描述

12.类文件头模板

在这里插入图片描述

/**
 * @ClassName ${NAME}
 * @Description
 * @Author ${USER}
 * @Time ${DATE} ${TIME}
 * @Version 1.0
 */

13.参数智能提示

在这里插入图片描述
在这里插入图片描述

14.git自动添加

在这里插入图片描述

15.maven配置

maven是依赖管理工具包,虽然IDEA自带,这个不好用,我们要自己配置
https://maven.apache.org/download.cgi
在这里插入图片描述

下面是我的配置
在这里插入图片描述
在这里插入图片描述
maven setting.xml

<?xml version="1.0" encoding="UTF-8"?>

<!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements.  See the NOTICE file
distributed with this work for additional information
regarding copyright ownership.  The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License.  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied.  See the License for the
specific language governing permissions and limitations
under the License.
-->

<!--
 | This is the configuration file for Maven. It can be specified at two levels:
 |
 |  1. User Level. This settings.xml file provides configuration for a single user,
 |                 and is normally provided in ${user.home}/.m2/settings.xml.
 |
 |                 NOTE: This location can be overridden with the CLI option:
 |
 |                 -s /path/to/user/settings.xml
 |
 |  2. Global Level. This settings.xml file provides configuration for all Maven
 |                 users on a machine (assuming they're all using the same Maven
 |                 installation). It's normally provided in
 |                 ${maven.conf}/settings.xml.
 |
 |                 NOTE: This location can be overridden with the CLI option:
 |
 |                 -gs /path/to/global/settings.xml
 |
 | The sections in this sample file are intended to give you a running start at
 | getting the most out of your Maven installation. Where appropriate, the default
 | values (values used when the setting is not specified) are provided.
 |
 |-->
<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
          xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
          xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
  <!-- localRepository
   | The path to the local repository maven will use to store artifacts.
   |
   | Default: ${user.home}/.m2/repository
  <localRepository>/path/to/local/repo</localRepository>
  -->
 <localRepository>D:\maven_local_space</localRepository>
  <!-- interactiveMode
   | This will determine whether maven prompts you when it needs input. If set to false,
   | maven will use a sensible default value, perhaps based on some other setting, for
   | the parameter in question.
   |
   | Default: true
  <interactiveMode>true</interactiveMode>
  -->

  <!-- offline
   | Determines whether maven should attempt to connect to the network when executing a build.
   | This will have an effect on artifact downloads, artifact deployment, and others.
   |
   | Default: false
  <offline>false</offline>
  -->

  <!-- pluginGroups
   | This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e.
   | when invoking a command line like "mvn prefix:goal". Maven will automatically add the group identifiers
   | "org.apache.maven.plugins" and "org.codehaus.mojo" if these are not already contained in the list.
   |-->
  <pluginGroups>
    <!-- pluginGroup
     | Specifies a further group identifier to use for plugin lookup.
    <pluginGroup>com.your.plugins</pluginGroup>
    -->
  </pluginGroups>

  <!-- proxies
   | This is a list of proxies which can be used on this machine to connect to the network.
   | Unless otherwise specified (by system property or command-line switch), the first proxy
   | specification in this list marked as active will be used.
   |-->
  <proxies>
    <!-- proxy
     | Specification for one proxy, to be used in connecting to the network.
     |
    <proxy>
      <id>optional</id>
      <active>true</active>
      <protocol>http</protocol>
      <username>proxyuser</username>
      <password>proxypass</password>
      <host>proxy.host.net</host>
      <port>80</port>
      <nonProxyHosts>local.net|some.host.com</nonProxyHosts>
    </proxy>
    -->
  </proxies>

  <!-- servers
   | This is a list of authentication profiles, keyed by the server-id used within the system.
   | Authentication profiles can be used whenever maven must make a connection to a remote server.
   |-->
  <servers>
    <!-- server
     | Specifies the authentication information to use when connecting to a particular server, identified by
     | a unique name within the system (referred to by the 'id' attribute below).
     |
     | NOTE: You should either specify username/password OR privateKey/passphrase, since these pairings are
     |       used together.
     |
    <server>
      <id>deploymentRepo</id>
      <username>repouser</username>
      <password>repopwd</password>
    </server>
    -->

    <!-- Another sample, using keys to authenticate.
    <server>
      <id>siteServer</id>
      <privateKey>/path/to/private/key</privateKey>
      <passphrase>optional; leave empty if not used.</passphrase>
    </server>
    -->
  </servers>

  <!-- mirrors
   | This is a list of mirrors to be used in downloading artifacts from remote repositories.
   |
   | It works like this: a POM may declare a repository to use in resolving certain artifacts.
   | However, this repository may have problems with heavy traffic at times, so people have mirrored
   | it to several places.
   |
   | That repository definition will have a unique id, so we can create a mirror reference for that
   | repository, to be used as an alternate download site. The mirror site will be the preferred
   | server for that repository.
   |-->
  <mirrors>
    <!-- mirror
     | Specifies a repository mirror site to use instead of a given repository. The repository that
     | this mirror serves has an ID that matches the mirrorOf element of this mirror. IDs are used
     | for inheritance and direct lookup purposes, and must be unique across the set of mirrors.
     |
    <mirror>
      <id>mirrorId</id>
      <mirrorOf>repositoryId</mirrorOf>
      <name>Human Readable Name for this Mirror.</name>
      <url>http://my.repository.com/repo/path</url>
    </mirror>
     -->
     <mirror>
        <id>alimaven</id>
        <name>aliyun maven</name>
        <url>http://maven.aliyun.com/nexus/content/groups/public/</url>
        <mirrorOf>central</mirrorOf>       
      </mirror>
  </mirrors>

  <!-- profiles
   | This is a list of profiles which can be activated in a variety of ways, and which can modify
   | the build process. Profiles provided in the settings.xml are intended to provide local machine-
   | specific paths and repository locations which allow the build to work in the local environment.
   |
   | For example, if you have an integration testing plugin - like cactus - that needs to know where
   | your Tomcat instance is installed, you can provide a variable here such that the variable is
   | dereferenced during the build process to configure the cactus plugin.
   |
   | As noted above, profiles can be activated in a variety of ways. One way - the activeProfiles
   | section of this document (settings.xml) - will be discussed later. Another way essentially
   | relies on the detection of a system property, either matching a particular value for the property,
   | or merely testing its existence. Profiles can also be activated by JDK version prefix, where a
   | value of '1.4' might activate a profile when the build is executed on a JDK version of '1.4.2_07'.
   | Finally, the list of active profiles can be specified directly from the command line.
   |
   | NOTE: For profiles defined in the settings.xml, you are restricted to specifying only artifact
   |       repositories, plugin repositories, and free-form properties to be used as configuration
   |       variables for plugins in the POM.
   |
   |-->
  <profiles>
    <!-- profile
     | Specifies a set of introductions to the build process, to be activated using one or more of the
     | mechanisms described above. For inheritance purposes, and to activate profiles via <activatedProfiles/>
     | or the command line, profiles have to have an ID that is unique.
     |
     | An encouraged best practice for profile identification is to use a consistent naming convention
     | for profiles, such as 'env-dev', 'env-test', 'env-production', 'user-jdcasey', 'user-brett', etc.
     | This will make it more intuitive to understand what the set of introduced profiles is attempting
     | to accomplish, particularly when you only have a list of profile id's for debug.
     |
     | This profile example uses the JDK version to trigger activation, and provides a JDK-specific repo.
    <profile>
      <id>jdk-1.4</id>

      <activation>
        <jdk>1.4</jdk>
      </activation>

      <repositories>
        <repository>
          <id>jdk14</id>
          <name>Repository for JDK 1.4 builds</name>
          <url>http://www.myhost.com/maven/jdk14</url>
          <layout>default</layout>
          <snapshotPolicy>always</snapshotPolicy>
        </repository>
      </repositories>
    </profile>
    -->

    <!--
     | Here is another profile, activated by the system property 'target-env' with a value of 'dev',
     | which provides a specific path to the Tomcat instance. To use this, your plugin configuration
     | might hypothetically look like:
     |
     | ...
     | <plugin>
     |   <groupId>org.myco.myplugins</groupId>
     |   <artifactId>myplugin</artifactId>
     |
     |   <configuration>
     |     <tomcatLocation>${tomcatPath}</tomcatLocation>
     |   </configuration>
     | </plugin>
     | ...
     |
     | NOTE: If you just wanted to inject this configuration whenever someone set 'target-env' to
     |       anything, you could just leave off the <value/> inside the activation-property.
     |
    <profile>
      <id>env-dev</id>

      <activation>
        <property>
          <name>target-env</name>
          <value>dev</value>
        </property>
      </activation>

      <properties>
        <tomcatPath>/path/to/tomcat/instance</tomcatPath>
      </properties>
    </profile>
    -->
  </profiles>

  <!-- activeProfiles
   | List of profiles that are active for all builds.
   |
  <activeProfiles>
    <activeProfile>alwaysActiveProfile</activeProfile>
    <activeProfile>anotherAlwaysActiveProfile</activeProfile>
  </activeProfiles>
  -->
</settings>

16.几大优秀插件

在这里插入图片描述

idea插件官网

## 17. 快捷键

17.自动编译

在这里插入图片描述

18.序列化ID

在这里插入图片描述

19.Autowired爆红

在这里插入图片描述

20.打开工具栏

在这里插入图片描述

21.文件忽略

在这里插入图片描述

22.快捷键

退出代码提示:ESC
移动一行:Shift + Alt + ↑/↓
格式化: Ctrl + Alt + L
提取共性代码:Ctrl + Alt + M
代码自动填写:Alt + Enter
代码提示:Ctrl + Alt + 空格
代码跨选择:Ctrl + Alt
删除当前行:Ctrl + Y
复制当前行:Ctrl + D
向下换行:Shift + Enter
向上换行:Ctrl + Alt + Enter
查看属性方法详细:Ctrl + Q
查看属性方法在哪些地方使用了:Ctrl + F7
搜索文件:Ctrl + Shift
单行注释:Ctrl + / 
块注释:Ctrl + Shift + /
多行单选:Alt + A
代码选择(列如:try+catch):Ctrl + Alt + T
在当前页搜索:Ctrl + F
全局搜索:Ctrl + Shift + F
方法折叠:Ctrl +  -
方法展开:Ctrl + +
复制方法路径:Ctrl + Shift + C
关闭打开的类: Ctrl + F4
在路径中查找: Ctrl + Shift + F7

【调试部分、编译】
Ctrl+F2,停止
Alt+Shift+F9,选择 Debug
Alt+Shift+F10,选择 Run
Ctrl+Shift+F9,编译
Ctrl+Shift+F10,运行
Ctrl+Shift+F8,查看断点
F8,步过
F7,步入
Shift+F7,选择到底要 Debug 进入哪一个方法
Shift+F8,步出
Alt+Shift+F8,强制步过
Alt+Shift+F7,强制步入
Alt+F9,运行至光标处
Ctrl+Alt+F9,强制运行至光标处
F9,恢复程序
Alt+F10,定位到断点
Ctrl+F8,切换行断点
Ctrl+F9,生成项目

23.重复代码

在这里插入图片描述

24 创建MyBatis配置文件模板

在这里插入图片描述

<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE configuration  
            PUBLIC "-//mybatis.org//DTD Config 3.0//EN" 
            "http://mybatis.org/dtd/mybatis-3-config.dtd">
<configuration>

</configuration>

在这里插入图片描述

25 创建mybatis-mapper文件模板

在这里插入图片描述

<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE mapper
        PUBLIC "-//mybatis.org//DTD Mapper 3.0//EN"
        "http://mybatis.org/dtd/mybatis-3-mapper.dtd">
<mapper namespace="">

</mapper>

在这里插入图片描述

26 HTML格式化问题

在这里插入图片描述

27.快捷注入 Autowired

在这里插入图片描述

@Autowired
private $VAR$ $ENDS$;

28. 快捷写 SpringBoot 启动类

在这里插入图片描述

public static void main(String[] args){
    SpringApplication.run($VAR$.class, args);
}

29. 创建 web.xml 模板文件

在这里插入图片描述

<?xml version="1.0" encoding="UTF-8" ?>
<web-app xmlns="http://xmlns.jcp.org/xml/ns/javaee"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://xmlns.jcp.org/xml/ns/javaee
                      http://xmlns.jcp.org/xml/ns/javaee/web-app_4_0.xsd"
         version="4.0"
         metadata-complete="true">

</web-app>

30. 创建 hbm 模板文件

在这里插入图片描述

<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE hibernate-mapping
        PUBLIC "-//Hibernate/Hibernate Mapping DTD 3.0//EN"
        "http://www.hibernate.org/dtd/hibernate-mapping-3.0.dtd">
<hibernate-mapping package="">
    
</hibernate-mapping>

31. 创建 hibernate.cfg 模板文件

在这里插入图片描述

<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE hibernate-configuration 
		PUBLIC "-//Hibernate/Hibernate Configuration DTD 3.0//EN"
		"http://www.hibernate.org/dtd/hibernate-configuration-3.0.dtd">
<hibernate-configuration>

</hibernate-configuration>

31. 修改 vue 模板文件

在这里插入图片描述

<template>
  <div></div>
</template>

<script>
export default {
  components: {},
  props: {},
  data() {
    return {

    };
  },
  // 计算属性 类似于 data 概念
  computed: {},
  // 监控 data 中的数据变化
  watch: {},

  methods: {},
  // 生命周期
  created() {

  },
  mounted() {
  },
  beforeCreate() {
  },
  beforeMount() {
  },
  beforeUpdate() {
  },
  updated() {
  },
  beforeDestroy() {
  },
  destroyed() {
  },
  activated() {
  }
}
</script>
<style scoped></style>

原文连接:https://blog.csdn.net/weixin_43344151/article/details/122544912

相关推荐

云徙科技CTO李楠:技术和技术人,与数字化共同进化

Java通过反射注解赋值

Java开发学习(十五)----AOP入门案例及其工作流程解析

2022-07-21 第四组 java之继承

JavaScript进阶内容——BOM详解

注意 new BigDecimal(double val) 的使用

创建私有CA,我就用openSSL

JavaScript必须掌握的四大基础知识(数据类型、原型和原型链、闭包、异步 promise)

百度APP Android包体积优化实践(二)Dex行号优化

814. 二叉树剪枝 : 简单递归运用题

【综合笔试题】难度 3.5\u002F5,多解法热门二叉树笔试题

【java刷算法】牛客—剑指offer3栈、数组、递归、二分法的初步练习

JavaScript中一些流行的模块、vite快速搭建、vue3简梳理

JavaScript进阶内容——DOM详解

JavaScript基础系列(6):`this`这六种使用方式

【跟着大佬学JavaScript】之数组去重(结果对比)

Java开发学习(十四)----Spring整合Mybatis及Junit

Java代码优化的30个小技巧

JavaScript 中的单例内置对象(Global & Math)

JavaScript:聊聊作用域、作用域链与它的一些优化